Miguel Ángel Peydró Rasero, Ph.D.
Associate Professor (Curriculum Vitae)
mpeydro@dimm.upv.es
Department of Mechanical and Materials Engineering
Universitat Politècnica de València
Campus de Alcoy, Plaza Ferrándiz y Carbonell, s/n
03801 Alcoy (Alicante) Spain
Institutional personal webpage
Education
- Ph. D., Universitat Politècnica de València, 2014
- M. Eng., Universitat Politècnica de València, 1997
- B. Eng., Universitat Politècnica de València, 1995
Biography
Miguel Ángel Peydró Rasero is an Associate Professor (“Profesor Titular de Universidad”) in the Department of Mechanical and Materials Engineering at the Universitat Politècnica de València (Spain), affiliated with the Alcoy campus. UPV+1
He teaches undergraduate and/or postgraduate-courses, supervises many final degree (Grado) and Master’s theses (he has supervised over 113 TFG/TFM). UPV
His research is carried out in the Institute of Materials Technology (Instituto Universitario de Investigación de Tecnología de los Materiales), with activity in topics including materials, polymers, composite sustainability, rheological behavior of materials under reprocessing, and related areas. 3Ciencias+4Riunet+4Panorama UPV+4
He has published approximately 60 journal articles in peer-reviewed journals, plus contributions in conference proceedings, book chapters and other publications. UPV+2Panorama UPV+2
He is involved in several research projects (at least 7), holds some research contracts, and participates in innovation and educational development activities including educational innovations.
Selected Publications
- Gámez, J. L., Jordá-Vilaplana, A., Peydro, M. A., Selles, M. A., & Sanchez-Caballero, S. (2025). Predictive ANN modeling and optimization of injection molding parameters to minimize warpage in polypropylene rectangular parts. Journal of Manufacturing and Materials Processing, 9(7), 236. DOI: https://doi.org/10.3390/jmmp9070236
- Eixeres, B., Sanchez-Caballero, S., Peydro, M., Parres, F., & Selles, M. (2025). Influence of injection molding process conditions on the mechanical properties of CF-PPS/PTFE composites. Alexandria Engineering Journal, 123, 381–391. DOI: https://doi.org/10.1016/j.aej.2025.01.022
- Ivorra-Martinez, J., Gomez-Caturla, J., Peydro, M. A., Selles, M. A., & Boronat, T. (2024). Commercial grade of P(3HB-co-3HHX) final properties adjustment by the modification of cooling conditions in the injection molding and ageing process. Macromolecular Materials and Engineering, 309(6), 2400033. DOI: https://doi.org/10.1002/mame.202400033
- Rodríguez, J. C., del Rey, R., Peydro, M. A., Alba, J., & Gámez, J. L. (2023). Design, manufacturing and acoustic assessment of polymer mouthpieces for trombones. Polymers, 15(7), 1667. DOI: https://doi.org/10.3390/polym15071667
- Ivorra-Martinez, J., Peydro, M. Á., Gomez-Caturla, J., Boronat, T., & Balart, R. (2023). The effects of processing parameters on mechanical properties of 3D-printed polyhydroxyalkanoates parts. Virtual and Physical Prototyping, 18(1), e2164734. DOI: https://doi.org/10.1080/17452759.2022.2164734
- Ivorra-Martinez, J., Peydro, M. A., Gomez-Caturla, J., Boronat, T., & Balart, R. (2022). The potential of an itaconic acid diester as environmentally friendly plasticizer for injection-molded polylactide parts. Macromolecular Materials and Engineering, 307(12), 2200360. DOI: https://doi.org/10.1002/mame.202200360
- Sanchez-Caballero, S., Selles, M. A., Peydro, M. A., & Cherukuri, H. P. (2021). Development of a constitutive model for the compaction of recovered polyethylene terephthalate packages. Waste Management, 133, 89–98. DOI: https://doi.org/10.1016/j.wasman.2021.07.015
- Parres, F., Peydro, M. A., Juarez, D., Arrieta, M. P., & Aldas, M. (2020). Study of the properties of a biodegradable polymer filled with different wood flour particles. Polymers, 12(12), 2974. DOI: https://doi.org/10.3390/polym12122974
- Sanchez-Caballero, S., Selles, M. A., Peydro, M. A., & Perez-Bernabeu, E. (2020). An efficient COVID-19 prediction model validated with the cases of China, Italy and Spain: Total or partial lockdowns? Journal of Clinical Medicine, 9(5), 1547. DOI: https://doi.org/10.3390/jcm9051547
- Sanchez-Caballero, S., Selles, M. A., Ferrandiz, S., Peydro, M. A., & Oliver, B. A. (2018). Failure analysis of a plastic modular belt in-service. Engineering Failure Analysis, 93, 13–25. DOI: https://doi.org/10.1016/j.engfailanal.2018.07.008
- Peydro Rasero, M. A., Garcia, F. P., Navarro Vidal, R., & Crespo Amoros, J. E. (2015). Influence of styrene-ethylene-butylene-styrene on the properties of acrylonitrile butadiene styrene-high-impact polystyrene blends. Journal of Elastomers and Plastics, 47(5), 449–462. DOI: https://doi.org/10.1177/0095244314528574
- Peydro, M. A., Parres, F., Navarro, R., & Sanchez-Caballero, S. (2014). Study of the influence of adding styrene-ethylene/butadiene-styrene in acrylonitrile-butadiene-styrene and polyethylene blends. Polymer Engineering and Science, 54(6), 1313–1324. DOI: https://doi.org/10.1002/pen.23682
- Juárez, D., García-Sanoguera, D., Ferrándiz, S., Peydró, M. Á., & Balart, R. (2013). Study, mechanical characterization and mathematical modeling of compatible SEBS blends for industrial applications in orthopedics and childcare. Polymer Plastics Technology and Engineering, 52(9), 862–868. DOI: https://doi.org/10.1080/03602559.2013.763783
- Peydro, M. A., Parres, F., Crespo, J. E., & Navarro, R. (2013). Recovery of recycled acrylonitrile-butadiene-styrene, through mixing with styrene-ethylene/butylene-styrene. Journal of Materials Processing Technology, 213(8), 1268–1283. DOI: https://doi.org/10.1016/j.jmatprotec.2013.02.012
- Crespo, J. E., Parres, F., Peydró, M. A., & Navarro, R. (2013). Study of rheological, thermal, and mechanical behavior of reprocessed polyamide 6. Polymer Engineering and Science, 53(4), 679–688. DOI: https://doi.org/10.1002/pen.23316
- Peydró-Rasero, M. A., Parres-García, F., Crespo-Amorós, J. E., & Navarro-Vidal, R. (2012). Thermoplastic elastomer addition for recovering recycled plastics. Mechanical and thermal characterization. Dyna Spain, 87(5), 526–532. DOI: https://doi.org/10.6036/4909
- Juárez, D., Ferrándiz, S., Balart, R., Reig, M. J., & Peydró, M. A. (2012). Rheological characterization and mathematical modeling of a SEBS blend for industrial applications where nowadays liquid silicone rubber is used. Key Engineering Materials, 502, 109–114. DOI: https://doi.org/10.4028/www.scientific.net/KEM.502.109
- Peydró, M. A., Parres, F., Crespo, J. E., & Juárez, D. (2011). Study of rheological behavior during the recovery process of high impact polystyrene using cross-WLF model. Journal of Applied Polymer Science, 120(4), 2400–2410. DOI: https://doi.org/10.1002/app.33337
- Peydró Rasero, M. A., Juarez Varón, D., Seguí Llinares, V. J., & Boronat Vitoria, T. (2009). Comparative study of injection molding pressure obtained from a simulation and from a monitored mold. AIP Conference Proceedings, 1181, 748–753. DOI: https://doi.org/10.1063/1.3273462
- Peydró Rasero, M. A., Juarez Varón, D., Boronat Vitoria, T., & Ferrandiz Bou, S. (2009). Determination of specific heat capacity of a thermoplastic material (ABS) for use in computer aided simulation in the injection molding process. AIP Conference Proceedings, 1181, 743–747. DOI: https://doi.org/10.1063/1.3273461
- Juárez, D., Peydró, M. A., Reig, M. J., & Parres, F. (2009). Design of innovation in a technical subject. AIP Conference Proceedings, 1181, 738–742. DOI: https://doi.org/10.1063/1.3273460
- Peydró Rasero, M. A., Juarez Varón, D., Parres García, F., & Crespo Amoros, J. E. (2009). Study of changes in viscosity of virgin and recycled PCTA DS2010, degradation of this material due to remaining at the injection temperature and improvements in the cleaning of capillary rheometers. AIP Conference Proceedings, 1181, 86–93. DOI: https://doi.org/10.1063/1.3273343
- Peydró Rasero, M. A., Juarez Varón, D., Selles Cantó, M. A., & Navarro Vidal, R. (2009). Innovative technical issues in the subject industrial processes. AIP Conference Proceedings, 1181, 722–730. DOI: https://doi.org/10.1063/1.3273459
- Sellés, M. A., Boronat, T., Ferrándiz, S., & Peydró, M. A. (2009). Using a neural network as a method to improve the quality in the thermoplastic injection moulding process. AIP Conference Proceedings, 1181, 769–774. DOI: https://doi.org/10.1063/1.3273463
- Boronat, T., Segui, V. J., Peydro, M. A., & Reig, M. J. (2009). Influence of temperature and shear rate on the rheology and processability of reprocessed ABS in injection molding process. Journal of Materials Processing Technology, 209(5), 2735–2745. DOI: https://doi.org/10.1016/j.jmatprotec.2008.06.029